Build Year: 2015

Used For: Rod & Line, ideal for Potting & Netting

Hull: GRP

Length: 7.00m

Beam: 2.70m

Draft:

Licence:

Available at additional £15k

Engine:

Honda BF115 4 Stroke - 184 Hours

Hydraulics:

Sea Star Hydraulic Steering
Hydraulic Trim Tabs
CNC Power Lift
Seawinch 550 Power Pack and Pot Hauler

Electronics:

Garmin 5012 touchscreen plotter, Garmin GSD 24 Sounder Module, Airmar 600w in hull transducer.
Raymarine C90W plotter, raymarine 24" 4KW Digital Radome, Raymarine S1000 Autopilot.
Echomax radar reflector
Cobra Marine Fixed DSC VHF
Radio/Cd Player. All external gps etc fixed to a stainless arch and mast. Mast removable for trailering.
Fixed Compass

Additional Information:

This is virtually a brand new Cygnus Cygnet 23 with full Seafish certification one of the last hulls to be moulded by Cygnus themselves. She was fitted out and first launched in July 2015 only used a couple of times before being taken out of the water for the winter then re-launched in May this year and only being sold due to a change of plans. She has only currently been used for rod & line fishing. The Cygnus Cygnet has the well proven and stable Trihedral hull design and for her length has a wide beam giving a massive forward working area, very well suited for netting and potting but ultimately would be idea for lots of uses. The Seafish Surveyor who inspected the vessel reported on how high a quality build she had been completed too. The vessel has stainless rails and fittings all round with the rails being set at the code of practice requirements for charter vessels. She is complete with twin Kobelt controls and set up with quick release hydraulic pipe fittings. The stainless light mast on the cabin roof has all quick release cabling etc for easy removal when trailering. Lots of thought went into the design of the vessel including removal stainless rails at the hauling station. The vessel has an aft wheel house off set to the port side which is big enough for two persons to comfortably get out of the elements. Within the wheelhouse there is a massive array of storage compartments for all your gear. Forward of the wheel house is a large under deck fish hold complete with an automatic bilge pump. The engine is not new but has only done 184 hours and not long had a full service. It has power trim & tilt and is set up on a CNC power lift enabling the engine to be re positioned depending on the loads being carried.
Twin Batteries (Brand new when boat put in Brixham Marina) with isolator.
Stainless rails all round including removable rail at hauling station and safety chain for entrance aboard and stainless non-return scuppers.
Stainless Air horns
2 x deck wash feeds running off 2 diaphragm pumps fed from a steel tube over stern not through the hull.
LED Spotlights to the rear and front of cabin
Cabin Interior complete with head lining and led spotlights, helmsman chair mounted on storage box. Copious amounts of other storage araes.


A full Cat A Uncapped licence is available.

There is a twin axle Indespension Super Coaster Trailer available.

Would consider P/X or Swap, W.H.Y