Build Year:

Used For: New Build for potting

Hull: Steel

Length: 7.87m

Beam: 3.29m

Draft: 1.01m

Licence:

None

Engine:

Mermaid Marine J444 (JCB) 63KW (84HP) Gearbox Borg Warner Velvet Drive 10-18-008. Both new 0 hours

Hydraulics:

Electronics:

Additional Information:

The boat was started at the end of 2007 by my late father based on a previous fishing boat he built which is still in use today. It was never finished due to ill health.
The original plan was to use the boat for potting but it would be ideal for pleasure, angling, diving etc.
Boat is well under way to completion. Tube, shaft, cutlass bearing, propeller and rudder all fitted and steering ram is there to fit. Fuel tanks are in but fuel lines need connected. Engine/gear box fitted and only needs final alignment. Wiring harness for engine is there.
No wiring has been done but electric pump, navigation lights, fuse box and wiring all there for fitting.
Everything new including engine and gear box.
Will need throttle and clutch cables.
Boat has been kept under cover all the time in the workshop where it was built. Painting below decks is done but some exterior painting still to do.
If you wanted to complete for use as a registered fishing vessel you would need to comply with MCA regulations.
Phone calls after 7.00 pm